PS-100

PS-100: PANEL MOUNT TDS CONTROLLER

HM Digital "PS-100" is a Panel Mount TDS Controller that monitors and controls levels of Total Dissolved Solids (TDS) in water. It includes an alarm setting option, digital calibration, and a tri-color display. The controller has a maximum set point to help maintain a limit of TDS allowed in the water.

It has a built-in sensor for Automatic Temperature Compensation (ATC) ensures readings always be accurate at various temperatures. You can clearly check the reading measurements as it includes a bright 5/8″ L.E.D. display.

FEATURES: 

• The controller has a maximum set point to help maintain a limit of TDS allowed in the water.
• If the TDS level rises to the set point, the controller will activate a warning light, sound an alarm (optional), and switch the dry contact position from the normal position (to operate a valve, pump, etc.).
• Once the TDS level drops below the set point, this will deactivate the light and alarm and switch the contacts back to the normal position (normally open or closed).

  PRODUCT DESCRIPTION:

• Accuracy: ±2%
• Resolution: 1 PPM
• Temp. Compensation: Automatic (1-65 degrees Celsius)
• Calibration: Adjustable
• Setting: Controlled by on-screen up/down buttons
• Relay Control: The unit will transmit an analog signal to a pump/valve when the ppm level reaches or exceeds the control setting
• Alarm: Optional steady beep (set by user)
• Display: Bright 5/8" L.E.D. display
• Probe: 1/2 bushing, 3 meter (9.8 ft) shielded cable
• Power supply: AC 110V / AC 220V
• Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
• Monitor Weight: 476 g (1 lb .8 oz)
• Total Weight: 680.4 g (1 lb 8 oz)
• Warranty : One Year Warranty