CIC-152

HM Digital · Controllers

The CIC controllers can monitor and control dosing and/or injection systems. This unit will control 2 separate systems.

Monitors and controls dosing or injection systems
Large, bright tri-color L.E.D. display
Two adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels)
Minimum and maximum control points will activate relay controls via switching dry contacts
The CIC-152 can control two different devices (e.g., a pump and a valve)
Two alarms (maximum and minimum levels) can be set independently of the control points
Digital calibration
On-screen temperature display
On-screen range & control indicator lights (green, yellow, or red)
Includes one sensor probe
Available with the NaCl conversion factor (model CIC-152-N) or the 442TM conversion factor (model CIC-152-4)

OFFICIAL PRODUCT TYPECIC-152: Dual Control Dosing/Injection TDS/EC

01 · OFFICIAL FEATUREMonitors and controls dosing or injection systems

02 · OFFICIAL FEATURELarge, bright tri-color L.E.D. display

03 · OFFICIAL FEATURETwo adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels)

04 · OFFICIAL FEATUREMinimum and maximum control points will activate relay controls via switching dry contacts

05 · OFFICIAL FEATUREThe CIC-152 can control two different devices (e.g., a pump and a valve)

06 · OFFICIAL FEATURETwo alarms (maximum and minimum levels) can be set independently of the control points

07 · OFFICIAL FEATUREDigital calibration

08 · OFFICIAL FEATUREOn-screen temperature display

09 · OFFICIAL FEATUREOn-screen range & control indicator lights (green, yellow, or red)

10 · OFFICIAL FEATUREIncludes one sensor probe

11 · OFFICIAL FEATUREAvailable with the NaCl conversion factor (model CIC-152-N) or the 442TM conversion factor (model CIC-152-4)

Technical data

Product specifications.

Specifications shown are based on current official HM Digital product information.

TDS Range: 0 – 5000 ppm (CIC-152-N): 0 – 8500 ppm (CIC-152-4)
EC Range: 0 – 9999 µS
Temperature Range: 1-80oC; 33-176oF
Accuracy: ±2% (of the reading)
Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
ATC: Yes (1 – 80 degrees Celsius)
Calibration: Digital (by push button)
Factory Calibration: 1413 µS
Conversion Factor: CIC-152-N: NaCl (avg. 0.5); CIC-152-4: 442 (0.4-0.7)
Set Points: Adjustable by push buttons. Control Point 2: Maximum TDS Limit. Control Point 1: Lower TDS Level.
Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control Point 1).
Relay Switching Electrical Specification: 5A, 250VAC
Alarm: Two independent alarms (set by the user)
Display: Bright 5/8″ L.E.D. display
Probe: 1/2″ bushing (NPT), 3 meters (9.8 ft) shielded cable (model SP-1-PSC)
Power Source: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 11.1 cm (2.8 x 2.8 x 4.4 in.)
Monitor Weight: 241 g (8.5 oz)
Total (Shipping) Weight: 610 g (1 lb 5.5 oz)

Support for CIC-152

View product documentation here or contact an authorised India distributor for selection, availability and sales enquiries.